3 Ways To Build A Pole Barn

pole barn shed plans

All the 3 methods work with simple basic woodworking tools, so it’s pretty easy to build, no matter the tools you have. Firstly, you have to build the posts for this pole barn shed. Before you insert the galvanized screws, you need to utilize a spirit level to align and plumb the components. Ensure you purchase a lumber that is straight and free from cracks, decay, and knots. You might just find the right plan for your next pole barn project here. If you’re comfortable reading pole barn plans, then you might just find the best plan for you without any problem.

This pole barn features a large 8 ft opening to the front. Read the local codes before starting the project, so you comply with the requirements. With this video tutorial guide, you can get free woodworking plans to build a 12×16 pole barn. The making process is simple to follow, and get the facts the pole barn is a straightforward build with a large 8-foot front door. This a step by step do-it-yourself woodworkingproject that is about 12 by 16 barn shed plans. This project featureseasy-to-follow instructions for building a gambrel-roof large shed with enoughstorage space.

pole barn shed plans

This easy-to-build structure is ideal for a garage, storage, or outbuilding. With the simple 12×24 design and large double doors in the front, you’ll have plenty of room to work on your car or equipment. This woodworking project can be completed with easy-going woodworking tools and materials. You’ll need post anchors, lag screws, wood screws, screwdriver, sander, framing square, and lots more. A pole barn is a type of building that has a gable roof. This type of roof is made up of two identical side-by-side pitched roofs that are attached at their edges.

Notch the top of the 2 4’s around the rafters and install using 3 1/2″ nails. Make 60 degree cuts at both ends of the braces and then set them to the front and back of the pole barn. Fit the 2 4 supports to the back of the barn, as shown in the diagram. Place the supports equally-spaced and lock them to the the poles using 3 1/2″ screws.

Continue the project by fitting the truss carriers to the front of the pole barn. Align the edges, make sure the beams are horizontal and then you can try these out lock them to the posts with 3 1/2″ lag screws. After marking the location of the posts, dig the 16″ wide holes and pour the concrete footings.

The tutorial is really thorough, and it’s easy to follow along with it. The creator also shows pictures of what he’s doing so you can see what it should look like at each stage of the process. The only downside look at more info is that the guide doesn’t tell you how high up the basement should be. It’s not an issue for most pole barns, but if yours is on high ground then you might have some issues with water damage and rodents.

In spite of the cheap price, it took a lot of time to complete this project, especially when they were driving those poles into the ground. They used pressure-treated lumber because it’s resistant to rot and decay. However, you can use anything that you want including cedar boards if you prefer that type of material for your barn. Treated lumber will give you a rustic look as opposed to cedar boards which gives you a more modern look.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top