10×10 Shed Plans Free PDF Download

10 x 10 shed plans

Assemble with 3 1/2″ nails as shown on illustration above. Measure and cut 2 4 lumbers to size, nail them in-between the purlins as blockings. First, wipe off any dirt or dusts off the T1-11 siding surface and the trims. Then apply two coats of exterior grade acrylic paint, allow 2 hours between coats to completely dry. Cover the entire roofing area with roof underlayment or tar paper, this is a water-resistant barrier material to keep the wood structures dry. A 10 10 size shed will require about 160SF to cover the entire roof area.

You can adjust the height of the wall frames so it suits your needs. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs . After you’ve finished assembling the trusses, active place them 24″ O.C. Attach the two set of cross bracing at midpoint of the end truss bays. The first step is cut nine 2 6 lumbers to 9′-9″ length, and two 2 6 lumbers to 10′-0″.

10 x 10 shed plans

Align the frame edges and make sure all corners are flush for a professional result. Cut two 2 4 to 10′ in length, these will be used for the top and bottom plates. Then, cut eight 2 x 4 to 7′-4 1/2″ for wall studs, these will be placed 16″ O.C. You’ll also this content need to cut out a 9′-5″ 2 4 for the double top plate. A successful DIY shed starts with choosing the right shed plans. First, determine how much space you can commit to an outbuilding, and check local codes for setbacks as you decide where to put it.

My ideal shed was a 14 14 but opted for two 12 10 sheds to avoid the hassle of getting a permit. It will be a bummer if you start building and get hit with a fine for not obtaining a permit. Or worse yet you need to tear down the shed because you are not even allowed to build one at all. This shed won’t take up to much space, but will provide plenty of space for storage. It is designed with an 5′ – 4″ width door that lets you quickly bring virtually everything into place.

Plans include a material list, step-by-step drawings, and PDF download. With a gable roof and barn-style doors, you can easily build this shed and add 80 square foot of storage to hold all your outdoor equipment. Plans include a free PDF download (link at bottom of blog post), drawings, measurements, shopping list, and cutting list.

Made of solid wood construction with a slated lean-to roof, this outbuilding is large enough to serve as a pool house or workshop, too. It comes with a standard 30-inch door for easy access and a firm ramp to allow you to get heavy items in and out with ease. The gable roof helps you to store more items have a peek here and also effectively drives away rainwater and other elements. A sturdy 5″ 5 1/2″ length ramp has also been designed to allow you to easily wheel bulky items into place. The shed comes with a 64-inch double-wide door and a sturdy ramp for easy movement and maneuvering, even when varying bulky items.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top