10 16 Large Gable Storage Shed Plans Blueprints

10 x 16 shed plans

These shed door plans can easily be customized to fit most sheds. Shed designs include gable, gambrel, lean to, small and big sheds. These sheds can be used for storage or in the sell garden. Fit the T1-11 siding to the other side wall of the shed. As you can notice, you have to make a few cuts so the panels fit around the window opening and door opening.

The siding walls are sturdy and tall enough to allow you keeping ladders, shovels, rakes and other long-handled tools off the floor. For performance and easy access, the shed comes with a 64-inch double-wide door that allows you to quickly bring all items in and out of place. The gable roof helps you to store more items and also effectively drives away rainwater and other elements. Refer to the Gambrel truss and gusset details below for dimensions and assembly instructions.

Fit the siding sheets to the opposite size of the shed. As you can easily notice in the diagram, you need to make a few cuts around the window and door opening. Align the edges flush and insert 6-8d nails, every 8″, so you can lock them into place tightly. visit the website Add an entire spare room’s worth of storage space with this 224 square foot simple lean-to roof garden shed. This shed has a peaked gable roof that provides enough headroom to hang items on the walls or create an overhead loft for seasonal items.

10 x 16 shed plans

Now that the front and back walls are completed, let’s start assembling the 2 side wall frames. To begin with, Cut two 2 4’s lumber to 15′-5″ as top and bottom plate, then a full 16′ 2 4 as the double top plate. This step by step woodworking project is about free 10 16 garden shed plans. I have designed this gable storage shed so you can create a lot of storage space and enhance the look of the backyard. I have designed this shed with large double doors on the front and a smaller door and a 3’x3′ window on one side. Remember that you need to read the local building codes before selecting the right location for the shed and before building the shed.

Measure and cut 15 T1-11 plywood siding panels to size. These shed panels are designed to interlock, so plan them out accordingly. These siding panels also come in standard sizes of 96″ x 48″, you’ll need about 450SF to cover the entire 16 10 shed. To construct the door header, cut two 2 6 lumber to 6′-3″ length, and insert 1/2″ plywood as filler. Use wood glue and 3 1/2″ nails to secure all the pieces together.

The high roof is great to add a loft for extra storage. The design has an option of two double doors, one each on the long and the gable side and plywood siding with cedar trim. This wooden shed provides a roomy 280 square foot of storage space and is durable enough get redirected here to protect your valuable tools. Finally, we need to lay out the roof shingles (310SF of 3-tab roof shingles) to complete the barn roof build. Start at the bottom of the Gambrel roof, measure and mark every increment height all the way to top of the roof.

At first, cut two 2 4 to 10′ in length, these will be used for the top and bottom plates. Then, cut eight 2 4 to 7′-4 1/2″ for wall studs, these will be placed 16″ O.C. You’ll also need to cut out a 9′-5″ 2 4 for the double top plate. Afterwards, drill pilot holes through the plates and insert the 3 1/2″ screws into the studs to secure in place. Finally, align the frame edges and make sure all corners are flush for a professional result. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top